Showing 37–48 of 174 resultsSorted by popularity
Advanced Dissolved Oxygen Benchtop Meter with Optical DO Probe (opdo®) - HI6421-02 (230V)
5,595.00 AED
HI6421 is a streamlined dissolved oxygen benchtop meter supplied with Hanna’s optical dissolved oxygen probe (opdo®) and features a large touch screen display for fresh and saltwater measurements.
edge® Multiparameter pH Meter - HI2020
1,795.00 AED
edge® tablet style meter is a groundbreaking design that is the culmination of Hanna?s vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5? thick yet rich in features to accommodate the needs of a vast amount of customers. For those that prefer very simplistic operation there is a basic mode operation with a simplified menu and options. For those who require advanced features there is the full featured standard operating mode. The edge HI2020 pH kit can be upgraded at any time with additional probes to measure Conductivity or Dissolved Oxygen.
16 mm Glass Cuvettes for Checker HC and Benchtop Photometers (4 pcs) – HI731321
94.00 AED
The HI731321 are the replacement glass cuvettes used with the HI7XX Checker HC colorimeters and the HI832XX benchtop photometers. Each cuvette has a 10 ml level mark to measure the appropriate volume. The HI731321 includes 4 cuvettes.
- Index mark for proper alignment in the photometer
- 10 ml level mark for adding correct volume
- Optically clear glass
HI83300-11 CAL Check Cuvette Kit for HI83300
633.00 AED
The HI83300-11 CAL CheckTM Standards are a simple solution to calibrating and validating the HI83300 Multiparameter Benchtop Photometer and pH meter. This set of high-quality standards comes with a certificate of analysis.
- Absorbance values at 420 nm, 466 nm, 525 nm, 610 nm, and 0 nm
- Supplied with Certificate of Analysis
- Reusable with long shelf-life
EPA Compliant Benchtop Turbidity and Chlorine Meter - HI83414
9,281.00 AED
The HI83414 is a high accuracy turbidity and chlorine benchtop meter. This meter is a combination of a nephelometer and photometer to measure the most important parameters in drinking water: turbidity and chlorine. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary chlorine standards used for calibration and performance verification. The HI83414 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements. For chlorine measurements an adaptation of EPA Method 330.5 and Standard Method 4500-Cl G is used.
- Compliant to EPA Methods
- Up to ±2% of reading plus 0.02 NTU accuracy
- USB for data transfer
Three Range Portable TDS Meter - HI8734
1,737.00 AED
The HI8734 is a rugged, portable TDS meter designed for the water conditioning industry, particularly in the softening, demineralization, reverse osmosis, and drinking water applicaitons. It can also be used for a wide variety of environmental conditions. TDS readings are adjusted with manual temperature compensation, assuring users of consistent and accurate measurements of total dissolved solids.
- Four-ring probe
- measurement ranges from 0.0 mg/L to 19.99 g/L with a ±1% FS accuracy
- Manual Temperature Compensation
Turbidity Calibration Standards - HI88713-11
426.00 AED
The HI88713-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 FNU range and 0.00 to 4000 NTU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- Standard values of <0.10, 15, 100, 750 FNU, and 2000 NTU
- Reusable with long shelf life stability
Generator Electrode Without Diaphragm for HI904 - HI900512
3,588.00 AED
The HI900512 is a fritless, glass body coulometric generator electrode for the HI904 Karl Fischer titration system. This design offers very low drift rates and easy cell maintenance.
- Glass Body
- No Diaphragm
- Easy Cleaning
Tubing for Solvent Handling Pump for Karl Fischer Titration Systems - HI900536
152.00 AED
The HI900536 is a set of solvent pump tubing for Hanna’s Karl Fischer titration systems.
- Flexible
- Durable
- Complete Set
Set of O-rings for HI904 - HI900542
71.00 AED
The HI900542 is a complete set of O-rings for the HI904 Karl Fischer titration system. These O-rings are supplied for all fittings on the titration systems hoses and bottle covers.
- Complete Set
- Quick Replacement
- Easy to Assemble
Desiccant for HI903 - HI900550
251.00 AED
The HI900550 is 250 grams of color-indicating, silica gel desiccant for the HI903 Karl Fischer titration system. The rechargeable, color-indicating silica gel prevents the ingress of ambient humidity in the sealed system. It’s color change allows the user to recognize when it’s adsorption capacity has depleted.
- Color Indicating Desiccant
- Ready for Immediate Use
Molecular Sieve Desiccant for the HI904 Karl Fischer Titration System - HI900551
1,752.00 AED
The HI900551 is 150 grams of molecular sieve desiccant used with the HI904 Karl Fischer titration system. The high efficiency molecular sieve desiccant helps maintain low and stable drift rates within the titration cell while preventing the ingress of ambient humidity into the sealed solvent system.
- Molecular Sieve Desiccant
- Ready for Immediate Use
