Showing 25–36 of 83 resultsSorted by popularity
Water Conditioning Photometer - HI83308 (230V)
HI83308 is a compact, multiparameter photometer for use in water conditioning applications. The meter is one of the most advanced photometers available with a innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 23 different programmed methods measuring 15 key water quality parameters and also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves. Water conditioning parameters include fluoride, chlorine, ammonia, manganese, copper, iron, silver and zinc.To save valuable laboratory benchtop space, the HI83308 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.Advanced optical systemUnparalleled performance from a benchtop photometerDigital pH electrode inputSave valuable bench space with one meter that works both as a photometer and as a laboratory pH meterAbsorbance measuring mode
edge® Multiparameter EC/TDS/Salinity Meter - HI2030
edge's groundbreaking design is the culmination of Hanna?s vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5? thick yet rich in features to accommodate the needs of a vast amount of customers. For those that prefer very simplistic operation there is a basic mode operation with simplified menu and options while for those who require advanced features there is the full featured standard operating mode. The edge HI2030 EC/TDS/Salinity kit can can be upgraded at any time with additional probes to measure pH or Dissolved Oxygen.
HI8035L 111800 µS/cm Conductivity Standard in FDA Bottle (500mL)
96.00 AED
HI8035L is a premium quality 111, 800 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution and supplied with a certificate of analysis. HI8035L is contained in an opaque, light-tight bottle that meets FDA requirements. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Supplied with Certificate of Analysis
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI8039L 5000 µS/cm Conductivity Standard in FDA Bottle (500mL)
HI8039L is a premium quality 5, 000 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution and supplied with a certificate of analysis. HI8039L is contained in an opaque, light-tight bottle that meets FDA requirements. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Supplied with Certificate of Analysis
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
Multi-range EC Meter - HI8733
The HI8733 is a durable, portable EC meter designed for use in areas of production and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of measurement. Conductivity readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements.Four-ring probeFour measuring modesAutomatic Temperature Compensation
Portable pH/EC/TDS Meter - HI9810-61
The HI9810-61 is an economical, wateproof, portable meter that measures pH, conductivity (EC), and total dissolved solids (TDS) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9810-61 is most suitable for agricultural, greenhouse and hydroponic applications.
- 3 in 1 probe with pH, EC/TDS and temperature sensors
- Amplified pH electrode for immunity to electrical noise including from ballasts and pumps
- Large LCD with instructions
Portable pH/EC/TDS/Temperature Meter with CAL Check™ - HI9813-61
The HI9813-61 is an economical, water resistant, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with a single probe. The HI9813-61 features the Hanna Instruments CAL Check that will allow the user to know when the probe needs to be calibrated or replaced. The meter operation is simplified with dedicated buttons for measurement modes to be displayed on the LCD and knobs for single point calibration of pH and EC.The HI9813-61 has a variable EC to TDS conversion factor that automatically changes from 0.56 to 0.78 ppm = 1 µS/cm based on the actual EC reading. This range is suitable for agricultural, greenhouse and hydroponic applications. The temperature correction coefficient (β) is fixed at 2%/℃.
- 3 in 1 probe with pH, EC/TDS and temperature sensors
- Amplified pH electrode for immunity to electrical noise including from ballasts and pumps
- CAL Check™
GroLine Hydroponics Waterproof pH/EC/TDS/Temperature Portable Meter - HI9814
The HI9814 is a slim, lightweight, waterproof, portable meter that measures the pH, conductivity (EC), total dissolved solids (TDS), and temperature of nutrient solutions used in hydroponics, aquaponics and greenhouse growing. The meter has two-button operation, one for turning the meter on/off and calibration while the other switches between the measurement modes. The HI9814 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
- 3 in 1 amplified probe with pH, EC/TDS and temperature sensors
- Quick Cal Mode to calibrate pH and EC/TDS with one solution
- EC to TDS Conversion factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)
Waterproof Portable EC/TDS/Resistivity/Salinity Meter - HI98192
The HI98192 is a rugged, portable EC/TDS/Resistivity/Salinity meter with the performance and features of a benchtop. This professional, waterproof meter complies with IP67 standards. The HI98192 is supplied complete with all accessories to perform an EC/TDS/ Resistivity/Salinity measurement packaged into a durable carrying case.
- Four Ring Probe
- Quick Connect
- Ergonomic, One-Handed Operation
Multiparameter Portable pH/EC/DO Waterproof Meter - HI98199
The HI98199 is a rugged, portable multiparameter meter with a single digital probe input. The digital probe input allows the connection of either a pH, conductivity or dissolved oxygen probe. Between the three probes and a built-in barometric pressure transducer the HI98199 can measure up to 10 water quality parameters with 5 being measured by sensors and the other 5 by calculation (i.e. EC to TDS). This professional, waterproof meter complies to IP67 standards and is supplied with all necessary accessories to measure pH/temperature packaged into a durable carrying case.
- Digital Electrodes
- USB-C for Data Transfer
- Dot Matrix Display
DiST 3 Waterproof Low-Range EC Tester - HI98303
The Hanna Instruments HI98303 DiST 3 is a low-range electrolytic conductivity (EC) tester than can measure up to 2000 µS/cm; making it ideal to monitor a variety of water quality applications including drinking water, water conditioning, irrigation water, and environmental monitoring. The DiST 3 is a rugged and reliable pocket-sized tester for use in the lab or field.
- Measures up to 2000 µS/cm
- Exposed Temperature Probe for Fast Response
- Simple Two-Button Operation
Pure Water Tester (0.0 - 99.9 µS/cm) - HI98308
The HI98308 Pure Water tester is a rugged and reliable pocket-sized tester that offers quick and accurate readings. The HI98308 Pure Water tester features graphite electrodes to reduce polarization effects and an exposed temperature probe for fast response when compensating for temperature changes. Manual calibration is performed to a single point.
- Exposed temperature sensor
- Very low range EC 0.0 to 99.9 µS/cm
- Single point manual calibration
