Showing 157–168 of 670 resultsSorted by popularity
Marine Nitrate High Range Checker HC Calibration Check Set - HI782-11
The Marine Nitrate High Range Checker HC Calibration Check Set provides a simple solution to validating the performance of the HI782 Marine Nitrate High Range Checker HC.
- Pre-tinted standard values
- Supplied with Certificate of Analysis
- Reusable with a long shelf-life
Marine Magnesium Checker HC Handheld Colorimeter - HI783
251.00 AED
The HI783 Marine Magnesium Checker HC is a handheld colorimeter that uses the Beer- Lambert principle to determine the concentration of magnesium colorimetrically. The HI783 is designed specifically to measure magnesium levels in a saltwater aquarium or in marine biology applications. The 1000 to 1800 ppm range is ideal for coral/fish or fish-only aquarium maintenance.
- Ideal for aquariums and marine biology
- Easier to use and more accurate than chemical test kits
- Small size, big convenience
Inquire Now
Marine Line Ammonia Checker HC - HI784
The HI784 Marine Ammonia Checker HC is a handheld colorimeter that uses the Beer-Lambert principle to determine the concentration of ammonia colorimetrically. The HI784 is designed specifically to measure ammonia levels in a saltwater aquarium. The 0.00 to 2.50 ppm range is ideal for coral/fish or fish-only aquarium maintenance.
- Ideal for aquariums and marine biology
- Easier to use and more accurate than chemical test kits
- Small size, big convenience
Holmium Oxide Glass Filter for Spectrophotometers - HI801-11
989.00 AED
The HI801-11 is a holmium oxide glass filter that is used to validate the wavelength accuracy of the HI801 iris spectrophotometer. The filter is mounted in a 10 mm square anodized holder and comes with a protective plastic holder that protects the filter when not in use.
- Glass filter mounted in anodized aluminum holder
- Fits all spectrophotometers that can accommodate 10 mm square cuvette
- Absorbance peaks measured at 361, 454, 536, and 638 nm
HI8035L 111800 µS/cm Conductivity Standard in FDA Bottle (500mL)
96.00 AED
HI8035L is a premium quality 111, 800 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution and supplied with a certificate of analysis. HI8035L is contained in an opaque, light-tight bottle that meets FDA requirements. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Supplied with Certificate of Analysis
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI8039L 5000 µS/cm Conductivity Standard in FDA Bottle (500mL)
96.00 AED
HI8039L is a premium quality 5, 000 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution and supplied with a certificate of analysis. HI8039L is contained in an opaque, light-tight bottle that meets FDA requirements. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Supplied with Certificate of Analysis
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI8082 3.5M KCl electrolyte fill solution for double-junction electrodes in a FDA Bottle (4 x 30mL)
290.00 AED
HI8082 is a pH and ORP electrode fill solution that contains 3.5M KCl, which is specifically produced for double junction electrodes. HI8082 is contained in an opaque, light-tight bottle that meets FDA requirements. The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
- Fill solution for double junction pH & ORP electrodes
- Convenient 30 mL FDA bottles
- Lot # and expiration date on bottles
HI83300-11 CAL Check Cuvette Kit for HI83300
633.00 AED
The HI83300-11 CAL CheckTM Standards are a simple solution to calibrating and validating the HI83300 Multiparameter Benchtop Photometer and pH meter. This set of high-quality standards comes with a certificate of analysis.
- Absorbance values at 420 nm, 466 nm, 525 nm, 610 nm, and 0 nm
- Supplied with Certificate of Analysis
- Reusable with long shelf-life
Multiparameter Photometer and pH Meter for Swimming Pools & SPAs - HI83326-02
2,698.00 AED
HI83326 is a compact, multi-parameter photometer for use in pool and spa applications. The meter is one of the most advanced photometers available with an innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 12 different programmed methods measuring 11 key water quality parameters and also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves. Pool and spa parameters include alkalinity, free chlorine, nitrite, and phosphate which are critical to maintaining a healthy system. To save valuable laboratory bench-top space, the HI83326 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.Advanced Optical System
- Unparalleled performance from a bench-top photometer
- Save valuable bench space with one meter that works both as a photometer and as a laboratory pH meter
HI83399-11 CAL Check Cuvette Kit for HI83399 Water and Wastewater Photometer
633.00 AED
The HI83399-11 CAL Check™ Standards provides a simple method for calibrating and validating the HI83399 Water and Wastewater Photometer. This high-quality set of standards comes with a certificate of analysis.
- Absorbance values at 420 nm, 466 nm, 525 nm, 610 nm, and 0 nm
- Supplied with Certificate of Analysis
- Reusable with long shelf-life
EPA Compliant Benchtop Turbidity and Chlorine Meter - HI83414
9,281.00 AED
The HI83414 is a high accuracy turbidity and chlorine benchtop meter. This meter is a combination of a nephelometer and photometer to measure the most important parameters in drinking water: turbidity and chlorine. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary chlorine standards used for calibration and performance verification. The HI83414 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements. For chlorine measurements an adaptation of EPA Method 330.5 and Standard Method 4500-Cl G is used.
- Compliant to EPA Methods
- Up to ±2% of reading plus 0.02 NTU accuracy
- USB for data transfer
Panel-mounted pH Analog Indicator with Self Diagnostic Test – HI8510
1,942.00 AED
HI8510 is ideal for monitoring pH in process control. It provides highly accurate pH measurements and displays values on an easy-to-read LCD. BNC input, amplified probe input and input from transmitter are supported.
- Automatic temperature compensation ensures fast, accurately compensated readings
- Displays values on the easy to read LCD
- A removable, transparent splash-proof cover protects the front panel
- ±5V power output and input terminals for amplified electrodes
