-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wastewater Multiparameter (with COD) Benchtop Photometer and pH meter - HI83314 (230V)
44,584.00 AED4,086.90 AED -
COD Test Tube Heater - HI839800 (230V)
45,200.00 AED4,213.80 AED -
-
-
-
-
HI7082L Electrolyte Solution 3.5M KCl (500 mL)
5320.00 AED276.30 AED -
HI7061L General Purpose Cleaning Solution (500 mL)
580.00 AED58.50 AED -
-
Benchtop pH/mV Meter with 0.01 Resolution - HI2211
41,825.00 AED1,627.20 AED -
HI7004/1L pH 4.01 Calibration Solution (1 L)
495.00 AED75.60 AED -
HI7007/1L pH 7.01 Calibration Solution (1 L)
4110.00 AED70.20 AED -
HI7010/1L pH 10.01 Calibration Solution (1 L)
495.00 AED69.42 AED -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Hanna edge® EC/TDS/Salinity Meter Bundle with Calibration Standards – HI2003-02
2,689.00 AED2,369.95 AED × -
edge® Dedicated Conductivity/TDS/Salinity Meter - HI2003
12,470.00 AED2,202.30 AED -
HI7031L 1413 µS/cm Conductivity Standard (500mL Bottle)
159.00 AED52.20 AED -
HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)
180.00 AED57.60 AED -
HI7033L 84 µS/cm Conductivity Standard (500mL Bottle)
180.00 AED57.85 AED -
“HI8061L General Purpose Cleaning Solution in FDA Bottle (500 mL)” has been added to your cart. Continue shopping
Showing all 6 resultsSorted by popularity
HI70300L Electrode Storage Solution (500 mL)
HI70300L is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH electrode hydrated. Ideally a storage solution should be used; never store an electrode in distilled or deionized water. The Hanna Instruments storage solution is specifically formulated to minimize microbial growth and to prevent any effects of diffusion/osmotic from storing a probe in a solution with the highly concentrated inner reference electrolyte. Storing your pH and/or ORP electrodes in a storage solution will also keep the junction clear. Maintaining the hydrated layer and clear junction will help to ensure a fast and reliable measurement. In the case of cleaning your pH electrode in one of our cleaning solutions, we recommend soaking the electrode in the HI70300L storage solution for at least one hour before taking measurements.
- Special formulation to minimize microbial growth and osmotic/diffusion effects between the solution and inner reference electrolyte
- Manufactured specifically for pH and ORP electrodes
- Clearly marked expiration date and lot number
HI7040L Zero Oxygen Solution Set (500 mL)
HI7040L is a high quality, bicomponent zero oxygen solution made from reagent grade chemicals. Hanna dissolved oxygen solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Prepared with reagent grade chemicals
- Hassle-free, easy to mix chemical component bottles
- Air-tight seal to ensure the quality of the solution
HI7041L Dissolved Oxygen Electrolyte Solution (500 mL)
The HI7041L electrolyte fill solution has been developed for Hanna’s polarographic dissolved oxygen probes. Having the correct electrolyte solution is crucial to the performance of your dissolved oxygen probe.
- Made with reagent grade chemicals
- Long-lasting supply of electrolyte
HI70300M Electrode Storage Solution (230 mL)
HI70300M is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH electrode hydrated. Ideally a storage solution should be used; never store an electrode in distilled or deionized water. The Hanna Instruments storage solution is specifically formulated to minimize microbial growth and to prevent any diffusion/osmotic effects from storing a probe in a solution with the highly concentrated inner reference electrolyte. Storing your pH and/or ORP electrodes in a storage solution will also keep the junction clear. Maintaining the hydrated layer and clear junction will help to ensure a fast and reliable measurement. In the case of cleaning your pH electrode in one of our cleaning solutions, we recommend soaking the electrode in the HI70300M storage solution for at least one hour before taking measurements.
- Special formulation to minimize microbial growth and osmotic/diffusion effects between the solution and inner reference electrolyte
- Clearly marked expiration date and lot number
HI7041S Dissolved Oxygen Electrolyte Solution (30 mL)
The HI7041S electrolyte fill solution has been developed for Hanna’s polarographic dissolved oxygen probes. Having the correct electrolyte solution is crucial to the performance of your dissolved oxygen probe.
- Convenient dropper bottle
- Made with reagent grade chemicals
HI7041M Dissolved Oxygen probe electrolyte solution (230mL) bottle
The HI7041M electrolyte fill solution has been developed for Hanna’s polarographic dissolved oxygen probes. Having the correct electrolyte solution is crucial to the performance of your dissolved oxygen probe.
- Made with reagent grade chemicals
- Long-lasting supply of electrolyte
