Showing 2365–2376 of 2451 resultsSorted by popularity
Inquire Now
HI7091L Pretreatment Reducing Solution for ORP electrodes (500 mL)
96.00 AED
HI7091L is a reducing pretreatment solution for the conditioning an ORP electrode that is used to measure reduction reactions. Hanna pretreatment solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Prepared with reagent grade chemicals
- Conditions ORP electrodes for fast response
- Air-tight seal to ensure the quality of the solution
Nitrite High-Range Checker® HC Calibration Check Set - HI708-11
121.00 AED
The Nitrite High-Range Checker® HC Calibration Check Set - HI708-11 provides a simple solution to validating the Nitrite High-Range Checker® HC - HI708 in the range of 0 to 150 ppm (mg/L) nitrite. This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker® HC.
- Supplied with Certificate of Analysis
- Standard value of 75 ±5 ppm nitrite @ 25℃
- Reusable with long shelf life stability
HI7075 Electrolyte Solution 1.7M KNO₃, 0.7M KCl (30 mL x 4)
332.00 AED
HI7075 is a fill solution that contains 1.7M potassium nitrate (KNO3), 0.7M potassium chloride (KCl) for use in fluoride ion selective electrodes. The electrolyte level in refillable electrodes should be topped off before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
- Fill solution for fluoride ISE
- Convenient 30 mL bottles
- Expiration date and lot number clearly marked on the bottle
HI7073L Cleaning Solution for Proteins (500 mL)
119.00 AED
The HI7073L is a special enzymatic cleaning solution that is specially formulated for use in applications were a pH electrode can be coated with proteins. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.
- Specially formulated cleaning solution to remove proteins from a pH electrode
- Air tight bottle with tamper-proof seal to ensure quality
- Expiration date and lot number clearly marked on the bottle
HI7072 Electrolyte Fill Solution, 1M KNO₃ (30 mL x 4)
252.00 AED
HI7072 is a 1M KNO3 electrode fill solution for use in double junction and ion selective electrodes. The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
- Fill solution for double junction and ion selective electrodes
- Convenient 30 mL bottles
- Clearly marked bottle with expiration date and lot number
HI70671L Cleaning & Disinfection Solution for Algae, Fungi and Bacteria (500 mL)
129.00 AED
The HI70671L is an effective, acidic effective cleaning solution that is specially formulated for use in applications were a pH electrode can be coated with algae, fungi and bacteria. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.Hanna’s line of cleaning solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Specially formulated cleaning solution to remove bacterial products from a pH electrode
- Air tight bottle with tamper-proof seal to ensure quality
- Expiration date and lot number clearly marked on the bottle
HI70670L Cleaning Solution for Salt Deposits (500 mL)
129.00 AED
The HI70670L is an effective, acidic cleaning solution that is specially formulated for use in industrial applications that permit electrodes to come into contact with salts. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.Hanna’s line of cleaning solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Specially formulated cleaning solution to remove salt deposits from a pH electrode
- Air tight bottle with tamper-proof seal to ensure quality
- Expiration date and lot number clearly marked on the bottle
Hydrochloric Acid 1N, 1L - HI70464
99.00 AED
HI70464 is a hydrochloric acid titrant for use in standard acid-base titrations. Hanna titration solutions and reagents have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Air-Tight
- Acid-Base Reagent
- Tamper-Proof Seal
Inquire Now
HI7042S Dissolved Oxygen Electrolyte Solution (30 mL)
81.00 AED
The HI7042S electrolyte fill solution has been developed for Hanna’s galvanic dissolved oxygen probes. Having the correct electrolyte solution is crucial to the performance of your dissolved oxygen probe.
- Convenient dropper bottle
- Made with reagent grade chemicals
Inquire Now
HI7041S Dissolved Oxygen Electrolyte Solution (30 mL)
73.00 AED
The HI7041S electrolyte fill solution has been developed for Hanna’s polarographic dissolved oxygen probes. Having the correct electrolyte solution is crucial to the performance of your dissolved oxygen probe.
- Convenient dropper bottle
- Made with reagent grade chemicals
HI7041M Dissolved Oxygen probe electrolyte solution (230mL) bottle
207.00 AED
The HI7041M electrolyte fill solution has been developed for Hanna’s polarographic dissolved oxygen probes. Having the correct electrolyte solution is crucial to the performance of your dissolved oxygen probe.
- Made with reagent grade chemicals
- Long-lasting supply of electrolyte
