Showing 1981–1992 of 2451 resultsSorted by popularity
Inquire Now
Foodcare pH/Temperature Electrode for Milk – FC101D
703.00 AED
FC101D is a specialized electrode that offers numerous features that improve pH testing for milk producers design to be used with the HI99162 Foodcare Meter. An integrated temperature sensor allows for temperature compensated pH measurements without the need for a separate temperature probe. The contact between the bulb's large surface area and the milk sample ensures a stable calibration and measurement.
- Durable PVDF plastic body ensures pH measurements can be safely taken on the dairy farm or production floor.
- Open junction design that resists clogging from milk-based solids.
Inquire Now
PVDF Body Foodcare pH Electrode with Quick Connect DIN Connector for Dairy Products - FC1013
703.00 AED
The FC1013 is a PVDF body, refillable, double junction pH electrode with a quick connect connector. This single ceramic, double junction electrode has a pH indicating probe made of general purpose glass and a food grade plastic body.
This design consideration is ideal for pH measurements in the food industry including sauces, juices, dairy products and other liquid or slurry forms of food. The recommended operating temperature range is from 0 to 80℃.
- Durable PVDF Body
- Double Junction Design
- Refillable Electrode
Inquire Now
PVDF Body Foodcare pH Electrode with BNC Connector for Dairy Products - FC100B
622.00 AED
The FC100B is a PVDF body, refillable, double junction pH electrode with a BNC connector. This single ceramic, double junction electrode has a pH indicating probe made of general purpose glass and a food grade plastic body.
This design consideration is ideal for pH measurements in the food industry including sauces, juices, dairy products and other liquid or slurry forms of food. The recommended operating temperature range is from 0 to 80℃.
- Durable PVDF Body
- Double Junction Design
- Refillable Electrode
Inquire Now
FC099 Stainless Steel Blade for Meat pH Electrodes
668.00 AED
The FC099 is a stainless steel blade for piercing meat with a pH electrode. This blade measures 35 mm (1.4’’) long and screws on the compatible Hanna Instruments pH electrodes designed for meat analysis. For a complete list of compatible electrodes see the specifications table below.
- Made of high grade stainless steel for long life
- Razor sharp for easy piercing into meat and other semi-solids
- Protects glass pH electrode from breakage
Inquire Now
FC098 Stainless Steel Blade for Meat pH Electrodes
691.00 AED
The FC098 is a stainless steel blade for piercing meat with a pH electrode. This blade measures 20 mm (0.8’’) long and screws on the compatible Hanna Instruments pH electrodes designed for meat analysis. For a complete list of compatible electrodes see the specifications table below.
- Made of high grade stainless steel for long life
- Razor sharp for easy piercing into meat and other semi-solids
- Protects glass pH electrode from breakage
Inquire Now
TDS Mini Controller (0 to 999 ppm) - BL983329
The BL983329 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) in a process stream that is within the 0 to 999 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve.
*The BL983329 uses a 0.5 conversion factor in which 100 µS/cm = 50 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Inquire Now
Conductivity Mini Controller (0.00-10.00 mS/cm) - BL983327
The BL983327 is a compact, panel mounted, process controller for measuring conductivity of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid valve to open and drain a tank (i.e. boiler bleed and feed) or add freshwater until the desired set point is reached.
The BL983317 is a closely related product that has the same measurement range but has a relay that is activated when the reading is below the set point.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Inquire Now
TDS Mini Controller (0.0 to 49.9 ppm) - BL983324
The BL983324 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) of a process stream that is within the 0.0 to 49.9 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve. The BL983324 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.
*The BL983324 uses a 0.5 conversion factor in which 1.0 µS/cm = 0.5 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Inquire Now
Conductivity Controller (0.00 to 19.99 µS/cm) - BL983322
The BL983322 is a compact, panel mounted, process controller for measuring electrolytic conductivity (EC) of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid that switches from one DI (deionized) tank to another or to open a valve that will allow lower EC water to flow into a tank being monitored in order to lower its EC. The BL983322 can also be used to monitor the quality of water from DI tanks or from a distillation apparatus. The BL983322 measures EC from 0.00 to 19.99 µS/cm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Inquire Now
TDS Mini Controller (0.00 to 19.99 ppm) - BL983321
The BL983321 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) of a process stream that is within the 0.00 to 19.99 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid that switches from one DI (deionized) tank to another or to open a valve that will allow lower TDS water to flow into a tank being monitored in order to lower its TDS. The BL983321 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.
*The BL983321 uses a 0.5 conversion factor in which 1.00 µS/cm = 0.50 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Inquire Now
Conductivity (EC) Mini Controller (0.0 - 199.9 µS/cm) - BL983320
The BL983320 is a compact, panel mounted, process controller for measuring electrolytic conductivity (EC) of a process stream that is within the 0.0 to 199.9 µS/cm range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid that switches from one DI (deionized) tank to another or to open a valve that will allow lower EC water to flow into a tank being monitored in order to lower its EC. The BL983320 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Inquire Now
TDS Mini Controller (0 to 1999 ppm) - BL983319
The BL983319 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) in a process stream that is within the 0 to 1999 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is below the set point. The relay can be used to supply power to a dosing pump to add fertilizer to a nutrient solution in order to maintain an ideal concentration.
*The BL983319 uses a 0.65 conversion factor in which 100 µS/cm = 65 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
