Showing 1309–1320 of 2445 results
Inquire Now
Flat Tip pH Electrode for Skin and Surfaces with DIN Connector - HI1414D
618.00 AED
The HI1414D is a glass body, single reference junction pH electrode made with low temperature glass and a DIN connector. This pre-amplified electrode features a built-in temperature sensor for temperature compensated measurements in a single probe design.
This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe’s flat tip makes it ideal for pH measurements on surfaces such as skin, leather, and paper. The HI1414D is recommended for use with Hanna’s HI99171 pH meter.
- Open Junction
- Flat Tip
- Built-In Temperature Sensor
Inquire Now
Flat Tip pH Electrode for Skin and Surfaces with BNC Connector – HI1413B/50
807.00 AED
The HI1413B/50 is a glass body, single reference junction pH electrode made with low temperature glass and a BNC connector. This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe's flat tip makes it ideal for pH measurements on surfaces such as skin, leather, agar plates, and paper.
- Open Junction
- Flat Tip
- Viscolene Gel Electrolyte
Inquire Now
Graduated Pipette (1000 µL) - HI731341
549.00 AED
The HI731341 is a 1000 µL volumetric pipette designed to measure and transfer fixed volumes of liquids that require precise dosing.
- Fixed volume
- Built-in tip ejector
- ±1.2% volume accuracy
Inquire Now
Graduated Pipette (100 µL) - HI731339P
90.00 AED
The HI731339P is a volumetric pipette designed to measure and transfer exactly 100 µL of solution to a cuvette. To obtain the highest accuracy and precision from the HI758 marine calcium Checker it is necessary to add exactly 100 µL of aquarium saltwater to the cuvette. Any variation will result in an inaccurate reading.
- Precise fixed volume measurement
- One handed operation
Caps for Glass Cuvettes Used with Turbidity Meters (4 pcs) - HI731335N
51.00 AED
The HI731335N are the replacement caps that screw on the glass cuvettes used with portable and benchtop turbidity meters. See below for a complete list of compatible part numbers. The HI731335N includes 4 caps that are used with the HI731331 glass sample cuvettes.
Inquire Now
Caps for Glass Cuvette Used with HI96 Series Portable Photometers (4 pcs) - HI731335
51.00 AED
The HI731335 are the replacement caps that screw on the glass cuvettes used with the HI96 series portable photometers. Each cap has a locking indexing tab that ensures the cuvette is inserted into the photometer in the same position. The caps are also used to block any light that would interfere with the optically based measurement. The HI731335 includes 4 caps.
- Locking index tab for proper alignment in the photometer
- Light blocking to prevent stray light from entering
Inquire Now
Glass Cuvettes for Turbidity Meters (4 pcs) - HI731331N
117.00 AED
The HI731331N are the replacement glass cuvettes used with the portable and benchtop turbidity meters. Each cuvette has a 10 ml level mark to measure the appropriate volume. The HI731331N includes 4 cuvettes.
- Index mark for proper alignment in the photometer
- 10 ml level mark for adding correct volume
- Optically clear glass
Inquire Now
Magnetic Stir Bars (10) Medium Sized - HI731320
348.00 AED
HI731320 is a set of 10 magnetic stir bars that are used with a magnetic stirrer whether independent or built into a meter. Each stir bar is coated with polytetrafluoroethylene (PTFE ) to provide chemical resistance to a wide variety of chemicals including aggressive substances.
- Chemically resistant PTFE coating
- Medium size - L 50 mm x dia 7 mm/ 2" x 0.3"
- 10 piece set
Inquire Now
Magnetic Stir Bars (10) - HI731319
263.00 AED
HI731319 is a set of 10 magnetic stir bars that are used with a magnetic stirrer whether independent or built into a meter. Each stir bar is coated with polytetrafluoroethylene (PTFE ) to provide chemical resistance to a wide variety of chemicals including aggressive substances.
- Chemically resistant PTFE coating
- Small size (1” x 0.3”)
- 10 piece set
Glass Cuvettes and Caps for Checker HC Colorimeters (set of 2)
39.00 AED
The HI731315 are spare glass cuvettes and plastic caps used with the HI7XX Checker® HC colorimeters. Each cuvette has a 10 ml level mark to measure the appropriate volume. The HI731315 includes 2 cuvettes and 2 caps.
- 10 ml level mark for adding the correct volume.
- Replacement for scratched or discolored cuvettes.
Maintenance Kit for Turbidity Meter - HI731313
572.00 AED
The HI731313 is a maintenance kit for wiht the HI93703 portable turbidty meters. The maintenance kit includes HI93703-0 (0 FTU), HI93703-05 (500 FTU) and HI93703-10 (10 FTU) calibration solutions along with two spare cuvettes, cuvette cleaning cloth and rugged carrying case that holds the accessories aloing with the ortable turbidity meter.
- Maintenance kit for HI93703 Portable Turbidity Portable Meter
- Includes cuvette cleaning accessories, spare cuvettes, and calibration standards
- Great for environmental, field, and laboratory testing
Inquire Now
Spare pH Electrode for Testers - HI73127
248.00 AED
The HI73127 is a spare pH tester electrode that is compatible with: HI98129, and HI98130 Combo multiparameter testers, HI98127 and HI98128 pHep® testers, and HI98121 ORP tester. These meters also use HI73127 replaceable electrode that has a stainless steel round connector and extendable cloth junction. This cartridge design has no pins to line up or that can break.
