Mini controllers
pH Mini Controller
Model No : BL981411
Conductivity Mini Controller (0.00-10.00 mS/cm)
Model No : BL983317
ORP Mini Controller
Model No : BL982411
TDS Mini Controller
Model No : BL983324
pH Mini Controller
Specifications
×
SKU | BL981411-web |
---|---|
Product Name | pH Mini Controller – BL981411 |
Quote Required | Yes |
pH Range | 0.0 to 14.0 pH |
pH Resolution | 0.1 pH |
pH Accuracy | ±0.2 pH |
pH Calibration | manual, through CAL (offset) trimmer |
pH Dosing Relay | maximum 2A (fuse protected), 250 Vac, 30 VDC |
pH Dosing Set Point | acid or alkaline contact open=acid dosage=relay ON if measurement > setpoint contact closed=alkaline dosage=relay ON if measurement < setpoint |
Installation Category | II |
Power Supply | BL981411-0 |
Dimensions | 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’) |
Weight | BL981411-0 |
Ordering Information | BL981411-0 (12 VDC) and BL981411-1 (115/230V) are supplied with mounting brackets, transparent cover and instruction manual. |
Conductivity Mini Controller (0.00-10.00 mS/cm)
Specifications
×
SKU | BL983317-web |
---|---|
Product Name | Conductivity Mini Controller (0.00-10.00 mS/cm) - BL983317 |
Quote Required | Yes |
EC Range | 0.00 to 10.00 mS/cm |
EC Resolution | 0.01 mS/cm |
EC Accuracy | ±2% f.s. |
EC Calibration | manual, with CAL trimmer |
EC/TDS Temperature Compensation | automatic from 5 to 50°C (41 to 122°F) with β =2%/oC |
Over Dosing Control | adjustable from 0 to 10 mS/cm |
Power Supply | models “-0” |
Dimensions | 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’) |
Weight | models “-0” |
Ordering Information | BL983317-0 (12 VDC) and BL983317-1 (115/230 VAC) are supplied with mounting brackets, transparent cover and instruction manual. |
ORP Mini Controller
Specifications
×
SKU | BL982411-web |
---|---|
Product Name | ORP Mini Controller – BL982411 |
Quote Required | Yes |
ORP Range | 0.0 to 199.9 ppm (mg/L) |
ORP Resolution | 0.1 ppm (mg/L) |
ORP Accuracy | ±2% f.s. |
mV (ORP) Calibration | manual, with CAL trimmer |
mV (ORP) Dosing Relay | maximum 2A (fuse protected), 250 Vac, 30 VDC |
mV (ORP) Dosing Set Point | adjustable from 0 to 199.9 mg/L (ppm) |
Dosing Terminals | reducing or oxidizing, selectable on the back panel contact open=reductant dosage=relay ON if measurement > setpoint contact closed=oxidant dosage=relay ON if measurement < setpoint |
Over Dosing Control | adjustable, typically from 5 to approximately 30 minutes |
Power Supply | models “-0” |
Dimensions | 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’) |
Weight | models “-0” |
Ordering Information | BL983315-1 (115/230 VAC) and BL983315-0 (12 VDC) are supplied with mounting brackets, transparent cover and instruction manual. |
TDS Mini Controller
Specifications
×
SKU | BL983324-web |
---|---|
Product Name | TDS Mini Controller (0.0 to 49.9 ppm) - BL983324 |
Quote Required | Yes |
TDS Range | 0.0 to 49.9 ppm (mg/L) |
TDS Resolution | 0.1 mg/L ppm (mg/L) |
TDS Accuracy | ±2% f.s. |
TDS Calibration | manual, with CAL trimmer |
EC/TDS Temperature Compensation | automatic from 5 to 50°C (41 to 122°F) with β =2%/oC |
EC to TDS Conversion Factor | 0.5 |
EC/TDS Dosing Relay | maximum 2A (fuse protected), 250 Vac, 30 VDC |
Over Dosing Control | adjustable, typically from 5 to approximately 30 minutes |
Power Supply | models “-0” |
Dimensions | 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’) |
Weight | models “-0” |
Ordering Information | BL983324-1 (115/230 VAC) and BL983324-0 (12 VDC) are supplied with mounting brackets, transparent cover and instruction manual. |