- No products in the cart.
Controller
Universal Process Controller
Model No : HI510
Universal Process Controller
Specifications
×
| SKU | HI510 |
|---|---|
| Product Name | Universal Process Controller - HI510 |
| Quote Required | No |
| Dosing Control | on/off, proportional and PID |
| Dosing Terminals | Up to 5 relays (independently configurable for process variables, Hold & Cleaning functions) Electromechanical relay SPDT and SPST contact outputs 5A – 250 Vac; 5A – 30 Vdc (resistive load) Fuse protected |
| Alarm Relay Set Point | Up to 5 relays (independently configurable for process variables, Hold & Cleaning functions) Electromechanical relay SPDT and SPST contact outputs 5A – 250 Vac; 5A – 30 Vdc (resistive load) Fuse protected |
| Over Dosing Control | yes |
| System Error | yes |
| Analog Ouput Signal | 2 or 4 independent, galvanically isolated outputs 0 – 22 mA configurable as |
| Analog Ouput Accuracy | ±2% full scale |
| Digital Input Signal | independent, galvanically isolated inputs (configurable for Hold & Cleaning functions) On state |
| Digital Output Signal | RS485 |
| Backlight | yes |
| Power Consumption | 15VA |
| Enclosure | *Single case ½ DIN, type NEMA4X, IP65 ingress protection |
| Installation Category | II |
| Panel Cutout | 1/2 DIN (brackets ordered seperately) |
| Input Channels | one digital input with RS485 interface |
| pH Electrode | HI10X6 series – pH and Temperature (ordered seperately) |
| ORP Electrode | HI20X4 series – ORP and Temperature (ordered seperately) |
| Logging Type | Interval log, up to 100 files, maximum 8600 records on each stored file. When the maximum limit of 100 stored files is reached, the most recent file will automatically erase the oldest one. Event log, maximum 100 records. When the maximum limit i |
| Connectivity | RS485 serial port - Remote monitoring and control USB-C port - Retrieve log files and firmware upgrading |
| GLP | yes |
| Calibration Timeout Reminder | yes |
| Analog Output | up to 4 based on configuration ordered |
| Display | Graphic LCD, 128 x 64 pixel B/W with backlight |
| Power Supply | 100 – 240 Vac ±10%; 50/60 Hz; 15VA; fuse protected (2A, 250V slow blow fuse) |
| Environment | -20 to 50 ºC (-4 to 122 ºF); maximum 100% RH non-condensing |
| IP Rating | IP65 |
| Dimensions | Width 144.0 mm (5.7”) x Height 144.0 mm (5.7”) x Depth 151.3 mm (6.0”) |
| Weight | Approximately 1.6 kg (3.5 lb.) |
| Notes | *For a water tight seal, tighten the front four screws on the front casing to 13.3 lbf·in (1.5 N·m, maximum 2.0 N·m), of torque. |