Out of stock

Pool Line High Range Copper Checker Reagents (25 Tests) – HI7024-25

HI7024-25 Pool Line High Range Copper Checker Reagents are high-quality reagents for use with the HI7024 Pool Line Copper Checker HC. They are manufactured in our state-of-the-art facility and clearly marked with the lot number and expiration date on each packet for traceability. The reagents are supplied with a certificate of analysis.

  • Pre-made reagents for ease of use
  • Supplied with a COA
  • Marked with expiration date and lot number for traceability

AED

Estimated delivery: 20 - 21 May

SKU:HI7024-25

The HI7024-25 are high-quality reagents that are pre-measured, allowing users to achieve fast and accurate measurements with their High Range Copper Checker® HC. These reagents follow the Bicinchoninate Method in which the reaction between copper and the reagent causes a purple tint in the sample. By simply adding the packet of HI7024-25 reagent to the sample, the reaction will take place and the HI7024 will determine the concentration from the color that is produced. The results will be displayed in ppm (mg/L) of copper. These reagents are made to be used with samples that have an expected range of 0.00 to 5.00 ppm Copper.

Copper Checker Reagents cert

Specifications

SKU HI7024-25
Name Pool Line High Range Copper Checker Reagents (25 Tests) – HI7024-25
Certificate of Analysis yes
Package Packets
Quantity 25 tests
Method adaptation of the EPA method. The reaction between copper and the bicinchoninate reagent causes a purple tint in the sample.

Manuals

Pool Line High Range Copper Checker Reagents (25 Tests) – HI7024-25

Bestsellers

GroLine Hydroponic Waterproof Pocket pH/EC/TDS/Temperature Tester - HI98131

663 AED
The HI98131 is a slim, lightweight, and waterproof pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
  • 3 parameters, pH, EC/TDS and temperature, in one meter
  • Quick Cal Mode to calibrate pH and EC/TDS with one solution
  • TDS Conversion Factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)

1413 µS/cm Conductivity Standard (1 L) – HI7031/1L

70 AED
HI7031/1L is a premium quality 1, 413 µS/cm conductivity standard that is prepared against an NIST traceable potassium chloride solution. Hanna conductivity solutions are airtight with a tamperproof seal to ensure the quality of the solution. Each bottle is clearly marked with the lot number and expiration date. Hanna's line of conductivity standards is specially formulated to be valid for 5 years from the date of manufacture for an unopened bottle.
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality

Multiparameter pH/ORP/EC/Pressure/Temperature Waterproof Meter - HI98195

3,876 AED
The HI98195 is a waterproof portable logging multiparameter meter that monitors up to 10 different water quality parameters including 5 measured and 5 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The complete system is simple to setup and easy to use. The HI98195 is supplied with all necessary accessories and packaged in a durable carrying case.
  • Multi-Parameter Display
  • Multi-sensor Probe
  • USB Connection

COD Low Range Reagent Vials, EPA Method (25 tests) - HI93754A-25

236 AED
The HI93754A-25 are barcode reagent vials that follow the EPA approved method for the low range determination of chemical oxygen demand (COD) using a compatible benchtop photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each box for traceability.
  • Pre-dosed reagents for ease of use
  • Supplied with certificate of quality
  • Marked with expiration date and lot number for traceability

pH 2.00 Technical Calibration Buffer (1 L) - HI5002-01

150 AED
HI5002-01 is a premium quality pH 2.00 technical calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle

HI5012 pH 12.00 Technical Calibration Buffer (500 mL)

102 AED
HI5012 is a premium quality pH 12.00 technical calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle

HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)

55 AED
HI7032L is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is prepared against a NIST traceable potassium chloride solution. Hanna TDS solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • 1, 382 mg/L (ppm) TDS calibration solution
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality
Back to Top
img
Product has been added to your cart