Showing 133–144 of 155 resultsSorted by popularity
HI763100 - Digital EC/Temperature Electrode
1,551.00 AED
The HI 763100 is a digital conductivity electrode with a built-in temperature sensor. Compared to the amperometric design of other conductivity probes, the HI 763100 is potentiometric probe with platinum sensors which allows for the possibility to measure high or low conductivity ranges using one probe. This electrode features an integrated microchip which stores calibration data, electrode type, and serial number. The HI 763100 is designed for use with Hanna’s edge® pH/EC/DO meter.
- Digital Probe with Built-in Microchip
- Internal Temperature Sensor
- 3.5 mm Connector
Lab Safety Shield - HI740217
313.00 AED
The HI740217 is a lab safety shield recommended for use with the HI839800 COD Test Tube Heater.
- Full protective coverage
- Custom fit for HI839800
- Supports laboratory safety measures
Inquire Now
Phosphate Low-Range Checker® HC Calibration Check Set - HI713-11
The Phosphate Low-Range Checker® HC Calibration Check Set - HI713-11 provides a simple solution to validating the Phosphate Low Range Checker® HC - HI713 in the range of 0.00 to 2.50 ppm (mg/L). This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker® HC.
- Supplied with Certificate of Analysis
- Standard value of 1.00 ±0.08 ppm phosphate @ 25℃
- Pre-measured reagent packet
Inquire Now
Phosphate Low-Range Checker® HC - HI713
The Hanna Phosphate Low-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Phosphate Low-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation
Shockproof Rubber Boot (Orange) - HI710034
155.00 AED
HI710034 is an orange shockproof rubber boot designed to protect your Hanna portable meter and provides easier handling. This special boot helps prevent damage due to accidental drops. It can withstand high temperatures of up to 200℃ (392℉).
- Soft touch and tactile feel
- Easy to grip when wet
- Maximum protection
Shockproof Rubber Boot (Orange) - HI710028
117.00 AED
HI710028 is a orange shockproof rubber boot designed to protect your Hanna portable meter and provides easier handling. This special boot helps prevent damage due to accidental drops. It can withstand high temperatures of up to 200℃ (392℉).
- Soft touch and tactile feel
- Easy to grip when wet
- Maximum protection
84 µS/cm Conductivity Standard (1 L) – HI7033/1L
77.00 AED
HI7033/1L is a premium quality 84 µS/cm conductivity standard that is prepared against an NIST traceable potassium chloride solution. Hanna conductivity solutions are airtight with a tamperproof seal to ensure the quality of the solution. Each bottle is clearly marked with the lot number and expiration date. Hanna's line of conductivity standards is specially formulated to be valid for 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI7031M 1413 µS/cm Conductivity Standard (230mL Bottle)
54.00 AED
HI7031M is a premium quality 1, 413 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI7010C pH 10.01 Calibration Solution (500 mL)
61.00 AED
HI7010C is a premium quality pH 10.01 calibration solution that has been dyed violet for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 2 years from the date of manufacture for an unopened bottle.
- Accuracy of ±0.01 pH @ 25℃
- Temperature chart of the actual pH value at various temperatures printed on each bottle
- Air-tight seal
HI70080C 800 mg/L (ppm) TDS Standard (25 x 20 mL)
144.00 AED
HI70080C is a premium quality 800 mg/L (ppm) TDS solution that is NIST traceable and supplied with a Certificate of Analysis. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of TDS solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70080C is for 25 sachets containing 20 mL of solution.
- Supplied with Certificate of Analysis
- Temperature chart of the actual mg/L value at various temperatures printed on each sachet
- Convenient foil packaging
HI7007C pH 7.01 Calibration Solution (500 mL)
61.00 AED
HI7007C is a premium quality pH 7.01 calibration solution that has been dyed green for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Accuracy of ±0.01 pH @ 25℃
- Temperature chart of the actual pH value at various temperatures printed on each bottle
- Air-tight seal
